![]() This is way too high - something isnt right - could we have all your specs. The temperatures don't seem high enough to cause immediate damage, but is there risk of long-term damage from these temps? The CPU temperature jumps up and down really quickly, so I'm confident that the cooler is taking heat off it (otherwise it wouldn't drop so quickly, right?). The cooler reports a temperature of around 35C consistently, and there's warm air coming from the radiator. That seems high, but let me know what you guys think. I would say this is a good cooler for a 6700k and maybe some mild. It just means there is some problem with the cooler mounting, or possibly a bad temperature sensor, or badly mounted IHS. A: Im running a 7700k and at stock speeds and it stays at about 66C under stress test. HW monitor shows temps up to 97C (see attached). If my CPU is running at 3.2GHz with 1V applied and its temperature is 84C, is that okay Probably not. I ran Prime95 and AI Suite is showing CPU temp at 78C. When doing some intensive tasks, I can hear the fans spool up, but that is normal. I've already reseated the cooler (Corsair H100i) and replaced thermal paste (using Arctic Silver 5), I am fairly certain it's mounted properly. I have overclocked my Intel 6700K to 4.6GHz and it seems stable in Windows. If I dont do anything with it and just leave it on my temps will stay idle around 32-36C. #Good temp for cpu stress test 6700k Pc#I see a lot of people saying normal temperatures should always be between 30-65C, and mine gets much higher than that very commonly. When I first boot the PC my idle temps are usually around 29-31C. The temperatures seem a bit high, I want to know if this is normal or anything to be concerned about.Īt low utilization (0-10%), clock speeds are under 1GHz and temperatures are ~40C, 7W TDP.Īt ~15% utilization, clock speeds are around 3.75-4.0GHz, and temperatures jump up to ~70C really quickly, 38W TDP.Īt 100% utilization (Intel XTU stress test), clock speeds are around 4.2GHz, and temperatures are 80-90C, 60-80W TDP. I've had it for almost a year, but never really monitored temperatures or did any overclocking (I did try overclocking when I first got it, but was hitting 95C on stress tests at the "default" 4.5GHz so I didn't go further). Ok but whats it hit on stress tests Mine doesn. Even after manually setting the voltage to 1.35V on the core we were still seeing a 11-17C temperature difference between the core 2 and the others.I've recently started monitoring my CPU temperature, after hearing my fans spin up a lot. Just throw the CPU into there, no cooler and let it burn up. I found a lot of informations on the Internet (60C under heavy load is good, 70C is warm but still ok and one shall never go beyond 90 C) but nothing official. When you overclock or manually set the voltage you override that parameter and all the cores are set to the same voltage. I tried to find an official recommendation chart from Intel about the processor i7-6700K temperature range, but I could not manage to find one. In stock form the Intel Core i7-6700K has different Voltages for each core and they are dynamic. The one oddity that we noticed is that Core 2 was running 10-14C hotter than the other cores when the processor was under load and it was also 1-3C hotter at idle. The recovery time after the workload finished was the fastest we’ve ever seen as we literally went from running at 63-64C for a period of 10 minutes down to 30C in just a couple seconds. When we ran a run of Handbrake and found that the processor temperature topped out at 65C and the voltage jumped up to 1.2240V during this workload. This is a great idle temperature as the room temperature was 24C. For stability testing I recommend Asus RealBench. The Intel Core i7-6700K processor sitting on the desktop had a package temperature of 26C and the voltage was set to 0.7580V. Intel Extreme Tuning Utility - CPU Stress Test: 94 For thermal testing I recommend Prime95 Version 26.6 Small FFTs. We used the Intel Extreme Tuning Utility v6.0.2.1 to monitor the temperatures on our Z170 test system with the Corsair H105 water cooler along with Gelid Extreme Thermal Compound. The lid isn’t soldered down like it once was, but at least Intel is using their best TIM on this processor! At 100 utilization (Intel XTU stress test), clock speeds are around 4.2GHz, and temperatures are 80-90C, 60-80W TDP. Intel no longer comments on the Thermal Interface Material (TIM) material that they use on processors, but we are confident in saying that it would be safe to assume the Intel Core i7-6700K processors use Next-Generation Polymer Thermal Interface Material (NGPTIM). Intel Core i7-6700K CPU Temperature Testing ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |